IPv6 Essentials: What You Need to Know About the New Version

By


Do We Really Need a New IP Version?

Living in a world where nearly every household has more than one computer, imagine the number of IP addresses required for them. Likewise, more and more IP telephones and IP television sets are being introduced around the world, ensuring that the public IP address range will eventually be exhausted. The Network Address Translator (NAT) has been implemented to provide a temporary solution to the scarce number of IP addresses.
Under these circumstances, the answer is: “YES” we definitely need a new, evolved, IP version; one that is more flexible, scalable, and adaptable to the growth and changes of the Internet. This new version of IP is IPv6 and extensive details on this can be found in IETF RFCs 2460 through 2466.
So what can we expect from the new IP version? Here’s what IPv6 has to offer:
  • Billions of addresses with no possibility of exhaustion
  • Ability to lighten the burden of huge routing tables
  • Provide extra security features
  • Simplify the routing process
  • Allow efficient and accurate Quality of Service options
  • Support possible future evolution
  • Provide interoperability between old and new version

Main Features and Improvements in IPv6

  • Simpler Header Format – IPv6 contains only eight fields, compared to fourteen fields in IPv4, making its processing faster and consequently improving throughput.
  • Longer Address Space – Source and destination addresses are sixteen bytes long each, versus four bytes in IPv4, which eliminates the shortage on IP addressing space.
  • Hierarchical Addressing Scheme – IPv6 provides a more efficient addressing scheme which decreases the huge number of routing entries in backbone routers with its efficient summarization capability.
  • Built-in Security – Data integrity and authentication are assured in IPv6 with the use of IPSec.
  • Better QoS support – A completely new 20-bit field in the IPv6 header is used to identify different traffic flows between a source and destination, and apply the necessary policies appropriately.
  • Extensibility – At the end of the IPv6 header, various extended options can be supported, making it possible for extensions to be easily adaptable.

IPv4 and IPv6 Header Comparison

IPv4 Header
IPv4 Header
IPv6 Header
IPv6 Header
After taking a closer look at the diagrams of headers for IPv4 and IPv6, here’s a rundown of the main differences:
  • IPv6 header consists of 40 octets in contrast to the 20 octets in IPv4.
  • Seven fields in IPv4 (marked with light blue shading) are not used in IPv6.
  • Three field names (marked in light green shading) are kept the same from IPv4 to IPv6.
  • Four fields (marked in light yellow) have changed names and position from IPv4 to IPv6.
  • One completely new field is incorporated in IPv6 (Flow label field).

IPv6 Header Details Include:

  • Version – A 4-bit field that is always 4 in IPv4 and 6 in IPv6.
  • Traffic class – This field is similar to the ToS field in IPv4 and it is used for Differentiated services classification.
  • Flow label – This is a new 20-bit field that is designed for differentiating traffic flows.
  • Payload length – Similar to Total Length field in IPv4, shows how many bytes follow the 40-byte header of IPv6.
  • Next Header – Identifies the upper layer protocol, similar to the Protocol field in IPv4.
  • Hop Limit – The concept of this field is similar to the TTL field in IPv4, which is to indicate the maximum number of hops a packet can traverse before being dropped.
  • Source address – 16-bytes address identifying the source address of the packet.
  • Destination address – 16-bytes address identifying the destination address of the packet.
  • Extension headers – These are optional headers that can be used to provide extra information.

All About IPv6 Addresses

IPv6 addresses are written in eight groups of four hexadecimal digits with colons separating each group like so:
  • 2000:0000:0000:0000:0457:ACFD:45CB:230B
First leading zeros within a group can be omitted. For example 0457 can be written as 457. Also, successive groups of zero bits can be replaced by a pair of colons as “::”. This substitution can only take place one time in an address. Using the above example: 2000:0000:0000:0000:0457:ACFD:45CB:230B can be replaced with:2000::457:ACFD:45CB:230B.
In a compressed IPv6 address representation, to be able to resolve its fully qualified representation, you can count the number of groups in the compressed address, subtract this number from 8, and then multiply the result by 16. The result will be the number of bits represented by the “::”.
For example, in the address 2000::457:ACFD:45CB:230B, there are five blocks. The number of bits expressed by the “::” is 48 or (8 – 5) x 16. Each group is represented by 16 bits, hence 3 (48/16) groups of leading “zeros” are represented by the “::”.
The difference IPv6 address types include:
  • Unicast – one-to-one
  • Multicast – one-to-many
  • Anycast – one-to-nearest
Note: Broadcast address scheme is not defined in IPv6; broadcasting as known in IPv4 is performed using multicast address in IPv6.
Unicast address type is the most common IP address type that is assigned to individual interfaces. It is divided into various types of unicast addresses according to their purpose. The most important ones are: IPv6 Global Unicast Addresses, Link-Local Addresses, and Special Addresses. Details about these addresses can be found in RFC 2373.
IPv6 Global Unicast Addresses are also known as Aggregatable Global Unicast Addresses, identified by the Format Prefix of 2000::/3 through E000::/3, with the exception of FF00::/8. These addresses are equivalent to public IPv4 addresses. By default, the number of bits used to identify the subnet is 64 and the number of bits used to identify the host on the subnet is again 64. At the ISP, or organization boundaries, these addresses can be aggregated hence limiting routing table entries.
The 64-bit host identifier in an IPv6 address is derived from the underlying link layer address (MAC address) of an interface. For mapping of MAC addresses into Interface identifiers in IPv6 global unicast and other addresses, Extended Universal Identifier (EUI) is used. The 64-bit EUI format is derived from the 48-bit MAC address by inserting the hexadecimal number FFFE (16 bits) between the upper 3 bytes and the lower 3 bytes of the MAC address, and setting the 7th bit of the leftmost byte to 1.

To Sum It All Up …

The benefits from IPv6 are huge. Although it’s a new technology, it is expected to grow exponentially and eventually completely replace IPv4. The new IPv6 is able accomplish more for several reasons:
  • It makes NAT and its drawbacks obsolete
  • It covers the IP addressing needs of every IP device on the planet
  • It’s ideal for supporting new generation services
  • Supports mobility
  • Provides security
  • Serves in the greater extend the strict quality requirements of broadband services
The transformation to IPv6 will not be completed overnight. It will take some years during which coexistence of IPv4 and IPv6 will be common, however IPv6 will eventually dominate.

Comments

Post a Comment

Popular posts from this blog

How to Create a Yoga Goddess Illustration in Adobe Illustrator

By
Image
As the music begins to play, a soft breeze fills the space with the undeniable smell of magnolia blossoms. She gracefully enters and begins a “tree pose” with her hands in Namaste form. Our female figure is inspired by the Indian culture for its gorgeous use of color and the grace of its yoga formations. I hope you’ll enjoy the journey as we retrace, step by step to enlightenment.  1. Becoming Flesh and Blood Step 1 Our first step will be to bring in our sketch. I've scanned her in at 300 dpi to catch as much of the detail as possible. I'm not as picky about my choice of initial drawing tools, and this particular project was completed with a mechanical pencil. We'll be working with a clean line quality from Adobe Photoshop and now we can begin to work. I'm working in Adobe Illustrator at a size of 8.5 x 11 inches for this specific project. When I'm ready to start my layers, I'll label my first layer as "Sketch" and lock the layer to make su...
Read more

How to Create an Icon Set using Adobe Photoshop

By
Image
In this tutorial, we are going to design a set of icons in Adobe Photoshop. An icon set needs to have the same background and theme. For learning purposes, we are going to design a sun icon, an ice flake icon, and an RSS icon. Let's get started. 1. Preparing the Canvas Step 1 Start by making a new file with size 350 px × 350 px . Click the small box next to the  Background Contents  option to change the new canvas color. Step 2 In the Color Picker dialog box, select grey ( #e0e0e2 ) for the canvas background color. Step 3 It is always a good idea to keep your work structured from the start. Make a new layer group and name it  sun . This is where we will place all layers used in the sun icon. 2. Designing the Icon Base Step 1 Use the  Rounded Rectangle Tool  to draw a rectangle with size  83 px × 64 px and  8 px  radius. To get accurate results, use the  Properties  panel. In this panel, you can simply enter the exact siz...
Read more

Android Essentials: Using the Contact Picker

By
Image
This tutorial will not only show you how to launch the contact picker and get results, but also how to use those results in Android SDK 2.0 and above. Getting Started This tutorial will start out simple, but then we’ll get in to some of the technical details of using Contacts with the ContactsContract class, which was introduced in API Level 5. Make sure you have your Android development environment installed and configured correctly. You’re free to build upon any application you have, start a new one from scratch, or follow along using the InviteActivity code in our open source project . We’ll then be adding functionality to allow a user to choose one of their existing contacts and send a canned message to them. We’re going to dive right in, so have all of your code and tools ready. Finally, make sure your device or emulator has some contacts configured (with names and emails) within the Contacts application. Step 1: Creating Your Layout There are two essential form control...
Read more