Cool Subnetting Tricks with Variable Length Subnet Mask

By -

Benefits of VLSM

VLSM provides the ability to subnet an already subnetted network address. The benefits that arise from this behavior include:
Efficient use of IP addresses: IP addresses are allocated according to the host space requirement of each subnet.
IP addresses are not wasted; for example, a Class C network of 192.168.10.0 and a mask of 255.255.255.224 (/27) allows you to have eight subnets, each with 32 IP addresses (30 of which could be assigned to devices). What if we had a few WAN links in our network (WAN links need only one IP address on each side, hence a total of two IP addresses per WAN link are needed).
Without VLSM that would be impossible. With VLSM we can subnet one of the subnets, 192.168.10.32, into smaller subnets with a mask of 255.255.255.252 (/30). This way we end up with eight subnets with only two available hosts each that we could use on the WAN links.
The /30 subnets created are: 192.168.10.32/30, 192.168.10.36/30, 192.168.10.40/30, 192.168.10.44/30, 192.168.10.48/30, 192.168.10.52/30, 192.168.10.56/30 192.168.10.60/30.
Support for better route summarization: VLSM supports hierarchical addressing design therefore, it can effectively support route aggregation, also called route summarization.
The latter can successfully reduce the number of routes in a routing table by representing a range of network subnets in a single summary address. For example subnets 192.168.10.0/24, 192.168.11.0/24 and 192.168.12.0/24 could all be summarized into 192.168.8.0/21.

Address Waste Without VLSM

The following diagram shows a sample internetwork which uses a network C address 192.168.10.0 (/24) subnetted into 8 equal size subnets (32 available IP addresses each) to be allocated to the various portions of the network.
This specific network consists of 3 WAN links that are allocated a subnet address range each from the pool of available subnets. Obviously 30 IP address are wasted (28 host addresses) since they are never going to be used on the WAN links.

Variable Length Subnet Mask - 1

Implementing VLSM

In order to be able to implement VLSMs in a quick and efficient way, you need to understand and memorize the IP address blocks and available hosts for various subnet masks.
Create a small table with all of this information and use it to create your VLSM network. The following table shows the block sizes used for subnetting a Class C subnet.

Variable Length Subnet Mask - 2

Having this table in front of you is very helpful. For example, if you have a subnet with 28 hosts then you can easily see from the table that you will need a block size of 32. For a subnet of 40 hosts you will need a block size of 64.

Example: Create a VLSM Network

Let us use the sample network provided above to implement VLSM. According to the number of hosts in each subnet, identify the addressing blocks required. You should end up with the following VLSM table for this Class C network 192.168.10.0/24.

Variable Length Subnet Mask - 3
Take a deep breath … we’re almost done. We have identified the necessary block sizes for our sample network.
The final step is to allocate the actual subnets to our design and construct our VLSM network. We will take into account that subnet-zero can be used in our network design, therefore the following solution will really allow us to save unnecessary addressing waste:

Variable Length Subnet Mask - 4

With VLSM we have occupied 140 addresses. Nearly half of the address space of the Class C network is saved. The address space that remains unused is available for any future expansion.
Isn’t that amazing? We have reserved a great amount of addresses for future use. Our sample network diagram is finalized as shown on the following diagram:

Variable Length Subnet Mask - 5

Final Thoughts

Variable Length Subnet Mask is an extremely important chapter in Network Design. Honestly, if you want to design and implement scalable and efficient networks, you should definitely learn how to design and implement VLSM.
It’s not that difficult once you understand the process of block sizes and the way to allocate them within your design. Don’t forget that VLSM relates directly to the subnetting process, therefore mastering the subnetting process is a prerequisite for effectively implementing VLSM. And feel free to go through my subnetting articles a couple of times to get a hang of the whole process.

Comments

Post a Comment

Popular posts from this blog

How to Create a Yoga Goddess Illustration in Adobe Illustrator

By -
Image
As the music begins to play, a soft breeze fills the space with the undeniable smell of magnolia blossoms. She gracefully enters and begins a “tree pose” with her hands in Namaste form. Our female figure is inspired by the Indian culture for its gorgeous use of color and the grace of its yoga formations. I hope you’ll enjoy the journey as we retrace, step by step to enlightenment.  1. Becoming Flesh and Blood Step 1 Our first step will be to bring in our sketch. I've scanned her in at 300 dpi to catch as much of the detail as possible. I'm not as picky about my choice of initial drawing tools, and this particular project was completed with a mechanical pencil. We'll be working with a clean line quality from Adobe Photoshop and now we can begin to work. I'm working in Adobe Illustrator at a size of 8.5 x 11 inches for this specific project. When I'm ready to start my layers, I'll label my first layer as "Sketch" and lock the layer to make su...
Read more

How to Create an Icon Set using Adobe Photoshop

By -
Image
In this tutorial, we are going to design a set of icons in Adobe Photoshop. An icon set needs to have the same background and theme. For learning purposes, we are going to design a sun icon, an ice flake icon, and an RSS icon. Let's get started. 1. Preparing the Canvas Step 1 Start by making a new file with size 350 px × 350 px . Click the small box next to the  Background Contents  option to change the new canvas color. Step 2 In the Color Picker dialog box, select grey ( #e0e0e2 ) for the canvas background color. Step 3 It is always a good idea to keep your work structured from the start. Make a new layer group and name it  sun . This is where we will place all layers used in the sun icon. 2. Designing the Icon Base Step 1 Use the  Rounded Rectangle Tool  to draw a rectangle with size  83 px × 64 px and  8 px  radius. To get accurate results, use the  Properties  panel. In this panel, you can simply enter the exact siz...
Read more

Android Essentials: Using the Contact Picker

By -
Image
This tutorial will not only show you how to launch the contact picker and get results, but also how to use those results in Android SDK 2.0 and above. Getting Started This tutorial will start out simple, but then we’ll get in to some of the technical details of using Contacts with the ContactsContract class, which was introduced in API Level 5. Make sure you have your Android development environment installed and configured correctly. You’re free to build upon any application you have, start a new one from scratch, or follow along using the InviteActivity code in our open source project . We’ll then be adding functionality to allow a user to choose one of their existing contacts and send a canned message to them. We’re going to dive right in, so have all of your code and tools ready. Finally, make sure your device or emulator has some contacts configured (with names and emails) within the Contacts application. Step 1: Creating Your Layout There are two essential form control...
Read more