How to install Everything

By -
Hello Fellas!

I have created another blog with a name "How to install..." I am adding and have added various software and operating system installation procedures with screenshots. 

 If you want, you can request me installation procedure of a software.

 Thanks for your support!

Comments

Post a Comment

Popular posts from this blog

IPV6 Configuration in Gns3

By -
Image
IPV6 OSPF Configuration on Gns3: This is the simple IPV6 tutorial for configuring IPV6 and OSPF for IPV6 on Gns3.  You must enable IPV6 routing on router by using command “ipv6 unicast-routing”, all other command are same like normal IP configuration but just replace IP with IPV6 in all commands. I use the c7200 IOS for this lab. Configure the topology as below: R1 Configuration: R1(config)#  ipv6 unicast-routing R1(config)#  ipv6 router ospf 1  R1(config-router)#  router-id 1.1.1.1 R1(config-router)# exit R1(config-if)#  interface Loopback1 R1(config-if)#  ipv6 address 2001:211:10:1::1/64  R1(config-if)#  ipv6 ospf 1 area 0 R1(config-if)#  interface Serial1/0 R1(config-if)#  ipv6 address 2001:210:10:1::2/64 R1(config-if)#  ipv6 ospf 1 area 0 R2 Configuration: R2(config)#  ipv6 unicast-routing R2(config)#  ipv6 router ospf 1  R2(config-router)#  router-i...
Read more

Swinging Physics for Player Movement (As Seen in Spider-Man 2 and Energy Hook)

By -
Image
I'm going to discuss how I like to implement a rope-swinging gameplay mechanic. When I started working on Energy Hook I mostly did everything with my own custom code. I believe it's possible to simply go into Unity and use the Configurable Joint to do some very similar stuff, but at the time it wasn't available. I'm pretty sure this has been the right call, anyway, because it gives me control over everything - and I can share it with you. The fundamentals of doing swinging the way I did - using  constraints  - are actually quite simple. (Hope you're not disappointed when you see what's under the hood.) It works the same whether you're making a 2D game or 3D game, it's just that the vectors are different, so I'll start off with 2D and then discuss some wrinkles when going to three dimensions. This article also assumes you're using a game engine like Unity that can do a lot of the work for you, like raycasting against geometry and orienting a chara...
Read more

How to Create an Icon Set using Adobe Photoshop

By -
Image
In this tutorial, we are going to design a set of icons in Adobe Photoshop. An icon set needs to have the same background and theme. For learning purposes, we are going to design a sun icon, an ice flake icon, and an RSS icon. Let's get started. 1. Preparing the Canvas Step 1 Start by making a new file with size 350 px × 350 px . Click the small box next to the  Background Contents  option to change the new canvas color. Step 2 In the Color Picker dialog box, select grey ( #e0e0e2 ) for the canvas background color. Step 3 It is always a good idea to keep your work structured from the start. Make a new layer group and name it  sun . This is where we will place all layers used in the sun icon. 2. Designing the Icon Base Step 1 Use the  Rounded Rectangle Tool  to draw a rectangle with size  83 px × 64 px and  8 px  radius. To get accurate results, use the  Properties  panel. In this panel, you can simply enter the exact siz...
Read more