How to Install Backtrack 5

By -

ownload the Backtrack 5 ISO

Head over to: http://www.backtrack-linux.org/downloads/
Then click the download button.
Backtrack-Linux Download Page
After that, you will be able to pick the version of backtrack that you want. I am going to recommend Backtrack 5 R3 since it is the most up-to-date. The window manager is up to you, but I am going to use gnome. Since I will be using backtrack in a virtual machine, the 32 bit version will be fine. We want the ISO because we can use it on a DVD, a USB flash drive, and install on a virtual machine. Direct download or torrent download is up to you. The file is little over 3 GBs, so it may take some time depending on your internet speeds.
Backtrack Download

Setting up a Virtual Machine

A virtual machine (VM) is the software implementation of a physical computer. In other words, it’s having another computer on your current computer. If you have never used a virtual machine it is a good time to start. VMs are excellent when it comes to practice labs which we will get to in another section.
To start, you’re going to need to get VM software. There are many out there, but I will list a few popular ones.
  1. VMware Workstation 9 (Windows/Linux) – $249.00 USD
  2. VMware Player (Windows/Linux)  – Free
  3. VirtualBox (Windows/Mac/Linux) – Free
Whichever VM software you go with, make sure it has a way to network with other VMs. If you don’t want to spend the money, go with VirtualBox. If you plan to get serious with penetration testing, you might want to consider getting a VMware Workstation license. It is full of useful tools and goodies such as sharing VMs and remote access and easy to work with.
I will be use VMware Workstation, but these programs are very similar in function. You shouldn’t have trouble following along if you are using something else.
After everything is installed and running, click “Create new virtual machine”.
VM Install 1
Next you’re going to select “Installer disc image file” then browse for the backtrack 5 ISO.
Vm Install 2
Select the operating system as linux, and the version as Ubuntu.
VM Install 3
Give the virtual machine a name such as “Backtrack 5 R3” and select a location for where you want to save the virtual machine files.
VM Install 4
When asked how much you want the virtual disk drive to be, you want at least 25 GB. This will be the most demanding requirement of Backtrack 5. I went and used 40 GB for my virtual machine. Although the backtrack-linux wiki says you need at least 20 GB, I found you will run out of space by the time you install updates or any other software. Then, you will have the option of storing the virtual disk as a single file, or split into multiple files. Creating a virtual disk as a single file will allocate all of the space right away. Splitting into multiple files means the drive files will grow as you need them. So if your hard drive space is limited on your host system, go with multiple files. If you have a massive drive, and not worried about space, go with a single file.
VM Install 5
And that’s it! The virtual machine is ready to go. I left mine at 1 GB of ram, if you are limited of memory, you can change this in the virtual machine settings. The recommended minimum memory is 512 MB, however you can try lower if you need to.
VM Install 6
Power on the virtual machine and you will be ready to install Backtrack.

Installing Backtrack 5

If you are installing on a hard drive, you will need to burn the Backtrack 5 ISO on to a DVD or a USB Drive. For directions on installing to a USB Drive, see here (link).
First turn on your machine, then insert your DVD or USB Drive. Then press the key that allows you to select your boot drive. You may have to go into the bios to enable this. Most often, F12 will work. Select either your DVD drive, or your USB Drive to boot from it. You should see a screen like this:
VM Install 7
After a few moments, you will see Backtrack Live CD menu. Press enter on Backtrack Text – Default Boot Text Mode.
VM Install 8
Wait about 10 seconds, and you will come to Backtrack shell console. Type the command “startx” to load the GUI.
VM Install 9
After another few moments, you will come to the desktop of Backtrack. Double click on the “Install Backtrack” to begin the install process.
BT Install 1
After you select your time zone, and language, you then have to partition your drive. If you are using a virtual machine, go ahead and use the whole drive. If you are dual booting, you will have to specify your partition for your two operating systems.
BT Install 2
Continue through the installer, and then click finish. Backtrack will then install on to your system. This process takes about 10-15 minutes.
BT Install 3
After it is finish, restart your system.
BT Install 4

Backtrack 5 Login

After restarting, you will come to a login screen like this:
BT Log 1
The default root name for Backtrack is “root” and the password is “toor”. After typing in the root username and password, you will come back to the Backtrack shell. Type “startx” to enter the GUI desktop.

Creating a Bootable USB Drive

Required Items:
UNetbootin is a program that allows you to create bootable USB drives for linux distros and Windows. UNetbootin will download the distribution or use an ISO file you selected from your hard drive.
  1. Once UNetbootin is downloaded you can run it by double clicking (Windows)
  2. Plug in your USB Drive.
  3. Start UNetbooin and select the “diskimage” option, then select your Backtrack 5 ISO.
  4. Select your USB Drive, then click “OK”.
    WARNING: This will format your USB Drive and remove all previous data.
Now you should be able to boot off of your USB Drive with Backtrack 5.
unetbootin

Comments

Post a Comment

Popular posts from this blog

How to Create a Yoga Goddess Illustration in Adobe Illustrator

By -
Image
As the music begins to play, a soft breeze fills the space with the undeniable smell of magnolia blossoms. She gracefully enters and begins a “tree pose” with her hands in Namaste form. Our female figure is inspired by the Indian culture for its gorgeous use of color and the grace of its yoga formations. I hope you’ll enjoy the journey as we retrace, step by step to enlightenment.  1. Becoming Flesh and Blood Step 1 Our first step will be to bring in our sketch. I've scanned her in at 300 dpi to catch as much of the detail as possible. I'm not as picky about my choice of initial drawing tools, and this particular project was completed with a mechanical pencil. We'll be working with a clean line quality from Adobe Photoshop and now we can begin to work. I'm working in Adobe Illustrator at a size of 8.5 x 11 inches for this specific project. When I'm ready to start my layers, I'll label my first layer as "Sketch" and lock the layer to make su...
Read more

How to Create an Icon Set using Adobe Photoshop

By -
Image
In this tutorial, we are going to design a set of icons in Adobe Photoshop. An icon set needs to have the same background and theme. For learning purposes, we are going to design a sun icon, an ice flake icon, and an RSS icon. Let's get started. 1. Preparing the Canvas Step 1 Start by making a new file with size 350 px × 350 px . Click the small box next to the  Background Contents  option to change the new canvas color. Step 2 In the Color Picker dialog box, select grey ( #e0e0e2 ) for the canvas background color. Step 3 It is always a good idea to keep your work structured from the start. Make a new layer group and name it  sun . This is where we will place all layers used in the sun icon. 2. Designing the Icon Base Step 1 Use the  Rounded Rectangle Tool  to draw a rectangle with size  83 px × 64 px and  8 px  radius. To get accurate results, use the  Properties  panel. In this panel, you can simply enter the exact siz...
Read more

Android Essentials: Using the Contact Picker

By -
Image
This tutorial will not only show you how to launch the contact picker and get results, but also how to use those results in Android SDK 2.0 and above. Getting Started This tutorial will start out simple, but then we’ll get in to some of the technical details of using Contacts with the ContactsContract class, which was introduced in API Level 5. Make sure you have your Android development environment installed and configured correctly. You’re free to build upon any application you have, start a new one from scratch, or follow along using the InviteActivity code in our open source project . We’ll then be adding functionality to allow a user to choose one of their existing contacts and send a canned message to them. We’re going to dive right in, so have all of your code and tools ready. Finally, make sure your device or emulator has some contacts configured (with names and emails) within the Contacts application. Step 1: Creating Your Layout There are two essential form control...
Read more